Weld-i
TM
HD 625
Instruction & Admin Manual
Page 6 of 47
InterTest, Inc. • 303 Route 94 • Columbia, NJ 07832
+1 (908) 496-8008 •
Released 8-20-21
Cautions and warnings.
Safety Precautions
This manual covers the Weld-i
TM
625 equipment including, its functions, and use. It also covers
precautions to be taken to ensure safe operation. Please read this manual thoroughly before operating
the equipment. By doing so, you will become familiar with the equipment’s capabilities and better
understand its functions. Save manual for future reference.
Follow all warnings and instructions in the manual and marked on the equipment.
Operational, General Safety Considerations and Precautions
Always observe the guidelines and precautions that follow.
There are no user-serviceable parts inside the controller. Refer all service to the InterTest
Customer Service and Support Group.
IMPORTANT: To ensure operator safety, read and understand this manual before using
the system.
To avoid injury, read and understand the associated documentation of support
components prior to operation. Direct any questions about equipment operation to
InterTest
Customer Service and Support Group at 908-496-8008 or via email to
Cautionary Symbols and Symbol Terminology
Table A describes the various symbols that may be included in this manual and mounted on the
equipment. The severity level of a potential hazard varies. Refer to for hazard level descriptions.
Table A — Manual and Equipment Safety Symbols
Symbols
Definitions
WARNING/CAUTION: Risk of electric shock.
WARNING/CAUTION: Refer to instruction manual.
WARNING/CAUTION: Avoid exposure to water and liquids.
WARNING/CAUTION: Avoid eye and skin exposure to UVA Light.
Warnings
Stop operation immediately when any abnormality or defect occurs
. Use during an abnormal
condition; such as emitting smoke, burning odors, after damage from dropping, invasion of foreign
