InterTest, Inc. • 908-496-8008
MZ4® HD-UV Gun Tube Inspection System
Page
20
Version 1.1 • June 2013
(3)
Refer to Figure 6
: thread the Bumper Guard into the Camera Head.
Figure 6
— Thread in Bumper Guard into Camera Head
(4)
Refer to Figure 7
: Mount the Centering Rings to the Camera Head. First, remove the 2 threaded
cap screws on either side of each of the centering rings (105, 120, or 155mm) with provided hex
head wrench. Place around the designated Centering Ring slots and thread the 2 threaded cap
screws back together. Figure 8 on next page shows the Camera Head with the Centering Rings
attached.
Figure 7
— Remove Cap Screws and Attach Centering Rings
