Before use
Assembling
The Interspiro OX10 molle BC allows for fine tuning / adjustments between
many different diver’s sizes. This offers a “tailored” fit for the diver’s unique
body shape. The adjustments will take some time to do, but since this BCD is
intended to be personal they will only be needed to be done once.
These mounting descriptions are for a basic size setting. If adjustments to
these settings needs to be done, then just alter the threading up, down or
sideways some molle bands to achieve a more correct size.
During the following fitting and sizing procedures, stop between procedures
and try on the OX10 Molle BC to assure that a correct and good fit has been
achieved before continuing with the next step.
Back worn ballistic plate pocket and velcro protector
(optional)
Ballistic plate pocket:
1.
Thread the webbing on the ballistic plate pocket through all the molle
bands but start by skipping one band, from the top, and then skip one at
the end also.
OX10 MOLLE BC
11
