6.
Put on the 40 mm side release buckle and thread the webbing back under
one molle band, through the tri-glide and tuck the remaining webbing
material under as many Molle bands as are needed. Repeat this process
with the other shoulder.
Cylinder pouch
Thread the three bands under the lowest molle bands on the BCD and under
the molle band on the cylinder pouch and then under the second molle band on
the BCD. Fasten the velcro on the bands with the velcro on the cylinder pouch.
Droppable weight pockets
Stick in the two plastic cords from the Weight release handle in the two
grommets you want to use “height wise”, under the protective cover, stick
out the plastic cords in the grommets you want to use “sideways”. Lock the
protective cover over the weight release handle with the push button. Take one
plastic cord and “sew” it with the loops under a molle band and into one band
on the droppable weight pocket, continue until all are done, stick in the rest of
the plastic cord in the closest grommet and “hide” the remaining plastic cord.
Repeat this process with the second droppable weight pocket on the other side
of the BC.
OX10 MOLLE BC
16
