background image

Safety Instructions 

 

All safety and operating instructions should be read before this product is 
operated and should be retained for further reference.  Please adhere to 

all the warnings on this product and in these operating instructions. Please 

follow these instructions carefully. 

 

Power.

 Only use the power source indicated on the device. Devices 

equipped with a grounded plug should only be used with a grounded type 

outlet. In no way should this grounding be disconnected, modified or 

suppressed. 
 

Power Supply Lead. 

To unplug the device always pull by the plug itself, 

not the power supply lead. The power source outlet should always be near 

the TheatreCue Main Unit and easily accessible. Ensure the power supply 
lead cannot be walked on or damaged by items placed on or against it. 

Do 

not use if the power supply lead is damaged. 

Using the device with a 

damaged power supply lead may expose you to electric shock or other 

hazards. Check the condition of the power supply lead regularly. Contact 
your dealer or service centre immediately for a replacement if damaged. 

 

Keep Away From Harmful Substances

 

 

To prevent the risk of electric shock and fire, do not expose this device to 

rain, humidity or intense heat sources (such as radiators or direct 

sunlight). Avoid using this equipment in environments where there is 
excessive heat, dust, moisture, chemicals, vibration or  mechanical 

shocks.  

 

Slots and Openings. 

These are designed into the device for ventilation 

and to avoid overheating. Always ensure these openings remain clear. 

Do 

not attempt to insert anything into these openings under any 
circumstances.

 If liquids have been spilled on, or objects have fallen into 

the product it must be checked by a qualified technician before re-using. 

 
Connections.

 All inputs and outputs (except for power input) are TBTS 

defined under EN60950. 

 

Summary of Contents for TheatreCue

















Reviews: