Interscience BAGMIXER 400, User'S Manual / Guarantee

Page: 8 / 16

BagMixer
®
400
8
VII. CHANGING THE SPACE BETWEEN
THE DOOR AND THE PADDLES ( VW and CC
®
)
You may reduce or increase the space between the doors and the paddles for special
samples.
1 . Release the crank at the back of the unit by pulling the
handle outwards .(Fig.5)
2 . Turn the crank to push the paddles
backwards or forwards. (Fig.6)
- Turn the crank 360° clockwise to push the
paddles forwards .
- Turn the crank 360° anticlockwise to push the
paddles backwards .
VIII. REMOVING THE HOUSING
This operation should only be carried out exceptionally, by authorized and qualified staff.
Disconnect the unit from the mains then :
1. Lift the lever to open the door, then unhook the lower edge of the door from
the axis bar.
2. Swing the lower edge of the door upwards and lay the door flat on top of the unit.
3. Lift off the green cap from the «timer» knob with a Phillips screwdriver, tap
gently but firmly on the brass screw and lift off the black button.
4. Unscrew the screws with a Torx screwdriver.
5. Gently remove the housing, disconnect the earth wire and the flat cable.
(Only on
BagMixer
®
VW et BagMixer
®
CC
models for the flat cable
.)
To close the housing, follow the instructions in reverse order.
(fig. 5)
(fig. 6)