Interroll Transfer module SH 1400
Maintenance and repair
Version 1.0 (06/2022) en
Translation of original operating instructions
29
Maintenance intervals
If maintenance is not performed according to schedule, it may lead to damages and failures. If
maintenance intervals are not followed, the warranty will be void.
All bearings of the module feature a life-time lubrication and are maintenance-free within the
operating parameters.
Maintenance and inspection list
Component
Interval
Task /
check
Work to be
performed
Performed by
Complete module
Daily
Check for soiling.
Clean and disinfect
Complete module
Weekly
Perform an acoustic check.
Initiate further measures
depending on the
component
Module conveyor
Weekly
Check module belt-carrying side for
cleanliness.
Clean dry as required
RollerDrive
1 month after
installation of
module
Check for firm seating in the side
profile.
Retighten as required
RollerDrive
Monthly
Check temperature.
Replace as required
Check for noise.
Replace as required
Check for damage.
Replace as required
Check for true running.
Replace as required
Check electrical connections.
Replace as required
Module conveyor
Every 6 months
Check for damage.
Replace as required
Check running behavior and tension. Adjust as required
Complete module
Every 6 months
Check moving parts for seating and
wear.
Replace as required
RollerDrive
Annually
Ensure that the RollerDrive shaft is
secured properly in the side profile.
Correct as required
Complete module
Annually
Check screw connections.
Tighten to standard as
required
