50 of 54
Version 2.4 (03/2020) Online
Translation of the original operating manual
Decommissioning and disposal
9
Decommissioning and disposal
CAUTION
Risk of injury from following incorrect procedure.
¾
Decommissioning must only be carried out by authorised, qualified personnel.
¾
Only decommission the RollerDrive when the system has been disconnected from the power supply.
¾
Switch off the power to the RollerDrive and ensure that it cannot be unintentionally switched on again.
9.1
Decommissioning
¾
Disconnect the RollerDrive cable from the control system.
¾
Remove the outer nut from the motor shaft.
¾
If the RollerDrive is fitted with an internal thread shaft pin, remove the screw on the shaft.
¾
Remove the RollerDrive from the side profile.
9.2
Disposal
The operating company is responsible for disposing of the RollerDrive according to correct procedure. In
doing so, the industry-specific and local provisions for disposing of the RollerDrive and its packaging must
be observed.
Summary of Contents for RollerDrive EC5000 AI
Page 6: ......
Page 54: ...INSPIREDBY EFFICIENCY 2020 INTERROLL EN 03 2020 Version 2 4...
