Version 2.4 (03/2020) Online
Translation of the original operating manual
13 of 54
Safety-related information
Maintenance
¾
Since the product in question requires no maintenance, it is sufficient to simply examine the RollerDrive for
visible damage on a regular basis.
¾
Never open up the RollerDrive.
Unintentional start-up
¾
Ensure that the RollerDrive cannot be switched on unintentionally, particularly during assembly and
maintenance work or in the event of a fault.
2.6
Interface to other devices
The integration of the RollerDrive into a conveyor system can create additional potential hazards. Such potential
hazards are not covered by this operating manual and must be analysed during the development, installation and
commissioning of the conveyor system as a whole.
¾
Following the integration of the RollerDrive into a conveyor system, the entire system must be checked for any
new potential hazards that may be present before the conveyor is switched on.
2.7
Operating modes/operating phases
Standard operation
Operation in the installed condition at the end customer as a component in a conveyor in an overall system.
Special operation
Special operation encompasses all operating modes/operating phases that are necessary to guarantee and maintain
safe standard operation.
Special operating mode
Comments
Transport/storage
-
Assembly/commissioning
In de-energised state
Cleaning
In de-energised state
Maintenance/repair
In de-energised state
Fault location
-
Troubleshooting
In de-energised state
Decommissioning
In de-energised state
Disposal
-
Summary of Contents for RollerDrive EC5000 AI
Page 6: ......
Page 54: ...INSPIREDBY EFFICIENCY 2020 INTERROLL EN 03 2020 Version 2 4...
