Interroll RollerDrive EC100, User Manual

Page: 29 / 32

27
Version 3.0 (04/2013) en
Translation of the original instructions
RollerDrive EC100 / EC110
Abandonment and disposal
Abandonment
 Disconnect the motor cable from the control.
 Unscrew the outer nut at the threaded motor shaft.
 If the RollerDrive has a spring-loaded idler shaft, push the idler shaft inwards.
 If the RollerDrive has a FTM8 idler shaft, unscrew the bolt at the idler shaft.
 Extract the RollerDrive from the conveyor frame.
Disposal
The operator is responsible for the proper disposal of the RollerDrive. In doing
so, industry-specific and local provisions must be observed for the disposal of the
RollerDrive and its packaging.
Risk of injury due to improper handling
 Abandonment may only be executed by qualified and
authorized persons.
 Only abandon the RollerDrive after switching off the
power. Ensure that the RollerDrive cannot be turned on
accidentally.
CAUTION