Interroll RollerDrive EC100, User Manual

Page: 19 / 32

17
Version 3.0 (04/2013) en
Translation of the original instructions
RollerDrive EC100 / EC110
Assembly
Warning information for assembly
 Do not drop or mishandle the RollerDrive to avoid internal damage.
 Check each RollerDrive visually for damage before assembly.
 In order to prevent damage to the internal connections, do not hold, carry or
secure the RollerDrive by the motor cable.
 Do not force the RollerDrive when inserting it into the conveyor frame. It
should fit easily into the holes in the frame.
 Ensure that the proper tightening torque is applied to the RollerDrive hex nut
to prevent the shaft spinning in the frame and the wires twisting (
see
"Securing the RollerDrive in the conveyor frame", page 21 ).
 Do not twist the motor cable.
Rotating parts
Risk of pinched fingers
 Do not insert fingers between the RollerDrive and the
round belt, PolyVee belt or roller chain.
 Install a protection device (such as a guard plate) to
prevent fingers from getting trapped in the round belt,
PolyVee belt or roller chain.
 Install an appropriate warning on the conveyor.
Risk of damage leading to failure or shortened life
expectancy of the RollerDrive

Follow the instructions below.
CAUTION