Indoor Panel Unit with Linux OS
30
©202
2 INTERRA
PM2201200174AEN
IT
Product Manual
This information is entered by authorized persons during system commissioning. Unauthorized persons
should never change the relevant settings.
3.6.3.
Network
Click the
“Network” icon, then input 1
-16 digits password (
the default password is 123456
) to enter into the
following interface:
Fig. 33 :
Network interface of the Indoor Panel
IP:
The system will automatically display the IP address of the indoor monitor. The IP address is unique. The
default Mask address is 255.255.255.0. Normally, it is unnecessary to modify.
If you would like to modify it, a keypad will pop up when clicking the setting box twice. Enter your new Mask
address. The Gateway in one system must be on the same segment.
DNS:
Domain name resolution address (DNS of local operator). If the indoor monitor is used on LAN, the
address must be entered correctly; if it is used on LAN, the address can be ignored.
Server:
If the Central Management System (CMS) is used, the IP of the computer on which the CMS is installed
should be entered in this section. Click “OK” to save th
e settings.
This information is entered by authorized persons during system commissioning. Unauthorized persons should
never change the relevant settings.
