Indoor Panel Unit with Linux OS
11
©202
2 INTERRA
PM2201200174AEN
IT
Product Manual
Network:
Connect with the outdoor panel, indoor monitor or other network equipment by the network switch. When an
indoor monitor has a PoE function, the interface can supply power by connecting with a PoE network switch. If
the network interface has a 12 V power supply, pin No. 4 and 5 of RJ45 interface should connect with +12 of
power interface, and pin No. 7 and 8 should connect with GND of power interface.
Fig. 8 :
Network cable connection
Siren/Alarm:
When the alarm sensor is triggered, the output power is 12 V / 100 mA. Each interface of the alarm zone can be
connected with a normally open or normally-closed switch.
Fig. 9 :
Siren/Alarm interface pin connection
