5. PABX & System Usage
This telephone can be used behind a PABX or on a network that utilises the recall
function. There are many such systems and whilst it is likely that no problems will
be encountered, it cannot be guaranteed that the telephone will operate correctly
under all circumstances. Any difficulties should be referred to your supplier.
Recall
Before you attempt to change the recall switch, labelled TBR ER, see (Figure
4&5), you should disconnect the phone from the network.
You will need a screwdriver, or similar tool to remove the cover plate over the
switch. Simply slide the Switch marked TBR ER to the appropriate setting ( the
factory default is TBR ). If you are unsure which setting is applicable, please
consult your PABX manager or supplier. Do not adjust the switch marked N, S2,
S1.
Replace the cover, plug the phone back into the socket and it is ready for use.
PABX access
Where a PABX access digit is required to obtain a direct outside line, it may be
necessary to insert a pause after dialling the access digit (see page 8 Redial and
Pause function of this manual).
11
Figure 5 Recall Switch
