Interquartz Voyager 9283 Operating Instructions Manual Download Page 10

Page: 10 / 16

4. Operation

To dial a number, either lift the handset or press the handsfree button, wait for the
dial tone and then key in the number required.

Answering a call

You may answer a call by simply lifting the handset.

To answer in handsfree mode, you press the handsfree button, the call will
automatically be answered in full handsfree.

Manual Dialling

Lift the handset, listen for the dial tone and then dial the required number using
the keypad.

Handsfree Dialling

• Press the handsfree button firmly and the dial tone will be heard in the

speaker.

• Dial the required number on the keypad.

• When the called party answers the phone, continue to speak using the

microphone in the telephone or pick up the handset. With the handset in
use it is possible to revert to speakerphone by pressing the handsfree
button BEFORE replacing the handset.

Memory Storage / Dialling

This telephone can store ten memories. The numbers are stored in Flash
memory which means that they will never be lost.

To store numbers, ensure that the telephone is connected to the line.

• either lift the handset or press the handsfree button

• press the store button

• dial the number to be stored using the keypad

Summary of Contents for Voyager 9283

















Search results

Summary of Contents for Voyager 9283

Reviews:

Related manuals for Voyager 9283

Brands by name

Popular brands

Interquartz Voyager 9283, Operating Instructions Manual

Search results

Summary of Contents for Voyager 9283

Reviews:

Related manuals for Voyager 9283

Brands by name

Popular brands