background image

13

6. INSTALLATION

UNPACKING

The carton contains the following :
* Telephone body and handset
* Coiled cord and line cord.
* Operating Manual.

GENERAL SETTING-UP

1. Fit the COILED CORD to the appropriate sockets in the HANDSET and the
    telephone base.
2. Fit the LINE CORD to the rear socket and to your telephone network outlet.
3. If long-term support without connection to the line for the memories is
    required, install 2 x AA size alkaline batteries in the battery compartment
    shown in Figure 1. The batteries are not supplied.
4. Set the Tone / Pulse switch to suit your system.
5. Set the Ringer Volume and Ringer Pitch controls.
6. See following sections to complete the installation.

LOCATION

The telephone should be placed on a desk, table or shelf where it is not likely to
be pushed off. If the unit is to be wall-mounted, it should be seated securely on
the WALL MOUNTING BRACKET. Avoid excessive heat, damp, dust, direct
sunlight, vibration, and other appliances or devices which may transmit or emit
electrical or electromagnetic radio frequency noise or signals (e.g. computers,
welders, pagers).

WALL MOUNTING

1. Fit the optional WALL MOUNT BRACKET (optional, not supplied) to the wall
    and attach the WALL MOUNT BRACKET to the underside of telephone (see
    Figure 2).
2. To enable the HANDSET to be supported in the cradle, follow the procedure
    shown in Figure 2 to reverse the HANDSET RETAINER.

NOTE : The WALL MOUNT BRACKET and MODULAR WALL JACK illustrated
in Figure 2 are available from your authorised Interquartz dealer.

Summary of Contents for IQ350
























Reviews: