Interpack ipg RSA 2625-TB, Operations Manual & Parts List

Page: 18 / 48

RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Specifications
3-2
Note: Machine should not be washed down or subjected to conditions causing condensation on
components.
Note: for further specifications on ETX Tape Heads, consult the ETX Tape Head manual provided with
this machine.
3.2 M
ACHINE
O
PERATING
C
ONDITIONS
Always operate the machine in a dry, relatively clean environment at 40 to 105 °F (5 to 40 °C) with clean, dry
cases. Machine must be set on a level surface or adjusted to operate on a level plane.
3.2.1 Power Requirements
• Electrical - 115V, 60HZ, 8.4A (966 Watts)
•
Compressed Air – N/A
This machine comes standard with one (1) 1/6 H.P. and one (1) 1/3 H.P. gear motors and comes with a
standard neoprene covered power cord and a grounded plug. Contact your Intertape Representative for
power requirements not listed above.
3.2.2 Operating Speed
Actual production rate is dependent on operator’s efficiency and the case size mix. Belt speed is 82 ft. per minute.
3.2.3 Tape Specifications
Use IPG Pressure Sensitive Case Sealing Tape .
A maximum tape roll diameter of 16 in. (406mm) on a 2 in. (50.8mm) diameter core can be installed on the tape
head. (Accommodates all Intertape brand film tape machine roll lengths).
The standard Tape Leg Length of 2.5 in. (63.5mm) is factory set. The standard tape leg length may vary up to
¼ in. (6mm) based on tape tension and line speed.
The optional Tape Leg Length of 2 in. (50.8mm) is factory set. The standard tape leg length may vary up to
¼ in. (6mm) based on tape tension and line speed.
The standard tape leg length is adju/- ¼ in. Refer to the tape head manual for adjustment of tape leg
length.
3.2.4 Case Specifications
Type
•
Regular Slotted Containers (RSC).
• Other style cases may be processed. Consult factory for details.
Material
125 - 275 PSI Bursting Test, Single or Double Wall B or C Flutes.