Interpack ETII+ LD, User Manual

Page: 32 / 73

UH178TW / UH678TW UDH178-01
32
4. Press the spring barrel against the spring
mandrel until it is ready to slide back on the
short shaft. See Figure 10-12. Move the
whole sub assembly back to its original
position.
Figure 10-12
5. Reinsert retaining rings to their grooves.
Should the 12 mm retaining ring brake (left
one on Figure 10-13), the shaft needs to be
freed to replace it. Calibrate spring pressure
with the M6 nuts as described earlier.
Figure 10-13
Snap Ring