Internet Security Systems RealSecure, User Manual, Page: 82 / 126

Appendix B: Configuration Tabs
74
The Evidence Log Tab
Introduction When your system is attacked, RealSecure Desktop Protector can capture evidence files
that record network traffic from the intruding system. Evidence files record the specific
packet that set off a protection response. This can be a good way to investigate intrusions
without using a lot of disk space for records.
Evidence files Evidence files are located in the installation directory folder. For example, if you installed
Desktop Protector in the Program Files directory on the
C:
drive, the evidence files are in
C:\Program Files\ISS\BlackICE
. The file extension for all evidence log files is
*.enc
.
Note:
If you upgraded to RealSecure Desktop Protector 3.5 from BlackICE Agent, your
evidence log files are still stored in
C:\Program Files\Network ICE\BlackICE
.
Evidence files are encoded as trace files. To view the contents of these files, you must have
a decoding application, such as Network Monitor (included with the Windows NT Server
and Windows 2000).
The Evidence Log tab controls the size and grouping of each evidence file set. For more
information about tracking evidence of intrusions, see “Collecting Evidence Files” on
page 52.
Note:
Evidence files are not the same as packet logs. Packet logs are a capture of all
inbound and outbound traffic on the system. An evidence file focuses on the traffic
associated with specific attacks.
Evidence Log
settings This table describes the available log file settings:
This setting... Has this effect...
Logging enabled Instructs Desktop Protector to collect evidence files for
suspicious events. If Desktop Protector is remotely installed
from ICEcap, this option is disabled by default. If Desktop
Protector is installed manually, this setting is enabled by
default.
File prefix Specifies the prefix for the evidence file names. To place a
date stamp (format YYYYMMDD) and number (NN) in the
file name, enter
%d
after the selected prefix. For example, if
you enter
evd
(the default file prefix), the file names will look
like this: evdYYYYMMDD-NN.enc . The time is in 24-hour
format in Greenwich Mean Time (GMT).
Maximum size (in
kilobytes) Controls how big each evidence file can get. For best
results, keep this value under 2048 kilobytes (2 MB). To
ensure that the file fits on a floppy disk, consider using a
maximum size of 1400 kilobytes (the default).
Maximum
number of files Limits the number of files Desktop Protector generates in
the specified collection time period. For example, if the
maximum number of files is 32 (the default value), Desktop
Protector does not generate more than 32 evidence files in
any 24-hour period.
Table 22: Evidence log tab settings