manualshive.com logo in svg

Internet Security Systems RealSecure, User Manual, Page: 14 / 126

Share
Download
Internet Security Systems RealSecure User Manual Download Page 14

Chapter 1: Introduction to RealSecure Desktop Protector

6

Application Protection

Introduction

BlackICE protects your computer from unknown applications and from applications 
connecting to a network, such as the Internet.

How the baseline 
works

First, BlackICE creates a baseline record (also known as a checksum) of the applications 
installed on your computer. Then it compares that baseline with any application that 
attempts to launch or to communicate with a network. If the application does not match 
the baseline, then BlackICE asks you if you want to stop the application or let it continue.

Note:

You must update the baseline whenever you make changes to your system, such as 

upgrading an application or installing a new application.

Turning off 
Application 
Protection

To turn off the Application Protection component:

1. Click 

Tools

Æ

Edit BlackICE Settings.

2. Select either the Application Control tab or the Communications Control tab. 

3. Clear the 

Enable Application Protectio

n check box.

Adding new or 
upgraded 
applications to your 
computer

Whenever you upgrade an application or install a new application on your computer, the 
application does not match the Application Protection baseline, so BlackICE regards it as 
an unknown application. This protects you from someone maliciously updating 
applications with or replacing them with other files that may be harmful. 

Avoiding alert 
messages when you 
install software

You can avoid warning messages during upgrade or installation by clicking 

Install Mode 

Options 

Æ

 Enable Install Mode

 on the first message you see. This temporarily disables 

Application Protection. Click 

Continue

 on the periodic messages until the upgrade or 

installation ends. Be sure to disable install mode when you are finished. 

Note:

After you install or upgrade an application, you must add it to the baseline. For 

information about updating your baseline to include your new or upgraded software, see 
“Managing your authorized applications” on page 44.

Summary of Contents for RealSecure































































































































Reviews:

No comments