Page 3
INSTALLATION INSTRUCTIONS
NOTE:
The air conditioner dimension is: 24
” W x 14 1/2” H x 18 1/2” D without front case.
To ensure that the unit operates
safely and efficiently, it should be installed, operated, and maintained according to these installation and operating
instructions and all local codes and ordinances, or, in their absence, with the latest edition of the National Electrical
Code. The proper installation of this unit is described in the following sections. Following the steps in the order
presented will ensure proper installation.
All wall sleeves used to mount the new air conditioner must be in structurally sound and have a rear grille that securely
attaches to sleeve.
Wall sleeve (4230050) is not shipped with chassis
and must be purchased separately.
CAUTION
:
When installation is complete, replacement unit
MUST
have a rearward slope as shown.
ITEMS IN KIT
You may not need all parts in the kit. Discard any unused parts.
Items
Dimension
Qty
Tapered Spacer Blocks
17
” Long
2
Centering/ Support Blocks
4 1/2
” x 3 1/2” x 1 1/2” 2
Plastic Divider
1/8
” x 4 1/2” x 14 1/2” 1
Stuffer Seal
1
” x 1 1/2” x 84”
1
Seal
3/4
” x 1” x 14”
2
Seal
1 1/2
” x 1” x 25”
3
Seal
1 1/2
” x 1” x 14”
2
Seal
3/8
” x 1” x 25”
3
Seal
3/8
” x 1” x 14”
2
Trim Frame (side legs)
2
Trim Frame (top & bottom legs)
2
Plastic Rear Grille
1
Rear Grille Aluminum
1
Ground Wire
1
Ground Screw
1
Toothed Washer
2
Self Tapping Screw
4
Screw Washer
4
Plastic Clasp
4
