NOTE: If user is unsure of COM port, right-click MY COMPUTER, and select PROPERTIES. Then select Device Manager under
the HARDWARE tab and scroll down to view PORTS.
2.3.3
Enter Activation Code
After selecting the ILT1700 COM port and succeeding with initialization , verify that the user is prompted with a warning that states
YOUR SOFTWARE LICENSE IS SET TO EXPIRE IN 30 DAYS. Select ENTER ACTIVATION CODE from the pop-up box and
enter the activation code, which can be found on the outside of the installation disk.
Verify that SOFTDAQ opens in CHART view, per the following image:
NOTE: If using the A803-4, only 4 channels will be visible on the right side of the chart
NOTE: Proceed to Section 4.0 Taking a Measurement in Software Mode
A803 Multiplexer Instruction Manual Rev -
Page 4
9/22/
2011
Your license is set to expire in 30 days
