International Datacasting P56 Series Manual Download Page 42

Page: 42 / 51

System Update

The firmware update is provided by Qbit as a single file with the file name
"qbit_q56x_fw_xxx.gz" . This file must be get ready on your computer before update.

(xxx: Version number)

•

Start the P56x web-server in a browser.

•

Choose Profiles under the menu Configuration and save

configuration on your computer.

•

Select the menu Firmware Upload and load the file.

•

Press the Send button to start the update. The update process must not be

interrupted.

•

Select the menu Restart and achieve a Hard Reboot with Default to ensure t

the IP address of the CTRL interface won't be reset.

•

Choose Profiles under the menu Configuration and reload the configuration.

•

Select the menu Restart and achieve a restart.

provided by Qbit as a single file with the file name

_fw_xxx.gz" . This file must be get ready on your computer before update.

server in a browser.

Choose Profiles under the menu Configuration and save the current

Select the menu Firmware Upload and load the file.

Press the Send button to start the update. The update process must not be

Select the menu Restart and achieve a Hard Reboot with Default to ensure t

the IP address of the CTRL interface won't be reset.

Choose Profiles under the menu Configuration and reload the configuration.

Select the menu Restart and achieve a restart.

_fw_xxx.gz" . This file must be get ready on your computer before update.

Press the Send button to start the update. The update process must not be

Select the menu Restart and achieve a Hard Reboot with Default to ensure that

Choose Profiles under the menu Configuration and reload the configuration.

Summary of Contents for P56 Series




















































Search results

Summary of Contents for P56 Series

Reviews:

Related manuals for P56 Series

Brands by name

Popular brands

International Datacasting P56 Series, Manual

Search results

Summary of Contents for P56 Series

Reviews:

Related manuals for P56 Series

Brands by name

Popular brands