International Datacasting P56 Series, Manual

Page: 14 / 51

2.4. LEDs
Status LEDs
1. Power
The unit has AC power.
2. RUN
The unit has successfully completed its boot cycle and is running.
3. STATUS 1
The unit is running and streaming data.
4. STATUS 2
STATUS 2 lights up if a valid AES signal has been detected at the digital audio input
otherwise no AES signal (LED off) has been detected at the digital audio input and
the unit has switched to the analog
updated approximately every 500msec.
5. ERROR
An error has occurred and the P56x
The unit has successfully completed its boot cycle and is running.
The unit is running and streaming data.
STATUS 2 lights up if a valid AES signal has been detected at the digital audio input
AES signal (LED off) has been detected at the digital audio input and
analog input connectors. The AES-signal state is
updated approximately every 500msec.
P56x has stopped processing.
14
STATUS 2 lights up if a valid AES signal has been detected at the digital audio input
AES signal (LED off) has been detected at the digital audio input and
signal state is