International Datacasting P56 Series, Manual

Page: 16 / 51

2.6. Front Panel Display
After switching-on the unit, the Qbit logo appears for a short time before the status
screen is shown on the display.
After the boot process, the unit is running the last saved configuration. In case the
unit is powered up the first time, it is running the factory configuration. You need to
set up the IP address for configuration. See section 4.1
configuration at the unit and 4.2
Process: displays the function (Encoder, Decoder, Codec
Codec-Decoder) and the state;
Blinking “** Running**” means no failure, otherwise the a
failure is displayed.
Input: displays the channel number and the configuration of the audio input
(analog or digital)
Codec: displays the stream
Output: displays the audio output
Pressing the ENTER button leads you to the Main screen. In this
can select the following options:
•
Network (CTRL)
•
Network (DATA) (N/A for ISDN models)
In the Main menu area the navigation is possible with the
and the system settings can be configured by selecting the highlighted
Pressing the ENTER button on the highlighted option leads you to the menu DATA or
CTRL for editing the system settings.
address fields is done by using the
into one of the address fields and back, ESC always leads to the next exit and
on the unit, the Qbit logo appears for a short time before the status
unit is running the last saved configuration. In case the
unit is powered up the first time, it is running the factory configuration. You need to
set up the IP address for configuration. See section 4.1 Network address
and 4.2 Network configuration using the Web Interface
displays the function (Encoder, Decoder, Codec-Encoder or
Decoder) and the state;
Blinking “** Running**” means no failure, otherwise the appropriate
failure is displayed.
displays the channel number and the configuration of the audio input
displays the stream
displays the audio output
Pressing the ENTER button leads you to the Main screen. In this screen the user
can select the following options:
Network (DATA) (N/A for ISDN models)
In the Main menu area the navigation is possible with the and cursor buttons
and the system settings can be configured by selecting the highlighted option.
Pressing the ENTER button on the highlighted option leads you to the menu DATA or
CTRL for editing the system settings. Navigating through the screen and inside the
address fields is done by using the
or and or cursor buttons. ENTER leads
into one of the address fields and back, ESC always leads to the next exit and
16
on the unit, the Qbit logo appears for a short time before the status
unit is running the last saved configuration. In case the
unit is powered up the first time, it is running the factory configuration. You need to
Network configuration using the Web Interface.
ppropriate
displays the channel number and the configuration of the audio input
screen the user
cursor buttons
option.
Pressing the ENTER button on the highlighted option leads you to the menu DATA or
Navigating through the screen and inside the
cursor buttons. ENTER leads
into one of the address fields and back, ESC always leads to the next exit and