MBA245
MBA246
TWO-UNIT SCOPE HOLDER
FOUR-UNIT SCOPE HOLDER
North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information, Call 1-800-433-2232
Pour de plus amples renseignements sur les produits, appeler au 570-825-2741
Para obtener información sobre el producto llame al: 570-825-2741
Information and specifications are subject to change
without notice. Please confirm at time of order
Les données et caractéristiques techniques sont
susceptibles d'être modifiées sans préavis. Veuillez
confirmer au moment de la commande.
Las informaciones y especificaciones están sujetas a
cambios sin previo aviso. Por favor, confirme a la vez
que realiza el pedido.
R
InterMetro Industries Corporation
Visit our Web Site / Visitez notre site Web / Visite nuestro sitio en la Web: www.metro.com
MBA245 MBA246
accessory bracket
accessory bracket
cam-nut
cam-nut
1. Assemble (2) accessory brackets, each with (4) hex-
head machine screws and (4) cam-nuts (do not
tighten).
2.
attach (2) mounting braces to the accessory
brackets with (4) hex-head machine screws as shown
above (Use the dimensions indicated for MBA245 or
MBA246).
3. Pierce holes in the foam liner inside the scope holder
cabinet: place the mounting bracket assembly against
the cabinet back, align the (4) mounting holes in the
cabinet and braces, and pierce the foam liner at the
mounting hole locations with a sharp object.
Loosely
4. Attach the cabinet to the bracket assembly with (4)
sheet metal screws using the holes in the foam liner as
guides.
5. Remove the top of the cart and slide the cam-nuts on
the accessory brackets down into the corner extrusions
as shown.
6. Tighten cam-nuts and replace top.
Note, to reverse the door, remove the vinyl-coated wire
holder and the shelf with grommets, turn the cabinet
over and re-install the holder and shelf.
mounting
brace
mounting
brace
15"
7 1/2"
FOR
MBP
CARTS
CAUTION: TWO (2) PEOPLE
REQUIRED FOR ASSEMBLY.
