SECTION 5
Norand Open Wireless LAN MIB RC4030E Gateway
Norand
R
Management Information Bases Reference Manual 5-33
gsHostMaxCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only ––read-reset
STATUS mandatory
DESCRIPTION
“The number of transactions which exceed the maximum
host delay time set in gsHostDelayMax.”
::= { gs 34 }
gsTermDelayTraceOn OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
“Terminal transaction delay diagnostics are enabled
by setting gsTermDelayTraceOn to a non-zero value.
The results of this trace are found in the tdTable.”
::= { gs 35 }
gsHostActive OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
“Indicates whether the host is active and
communicating with the controller. A value of 1 =
active, a value of 0 = inactive. The default is 0.
Once the host has communicated with the controller,
this value will always show ‘active’ (1) UNLESS the
cpctPortInactTimeout value in the cpcTable is set to
a non-zero value. If the controller has not received
a response from the host in the time (in seconds)
specified by cpctPortInactTimeout, gsHostActive will
get set to 0.”
::= { gs 36 }
rcbs OBJECT IDENTIFIER ::= { gwSession 2 }
–– The RCBS Table
rcbsTableReset OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
“Reset variable for the rcbsTable table.”
::= { rcbs 2 }
rcbsTableLastReset OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
“The time elapsed since the last reset of rcbsTable
table.”
::= { rcbs 3 }
–– Table Definition
rcbsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RcbsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
“SESSION control block status table. Each entry
corresponds to a terminal session.”
::= { rcbs 4 }