Intermec MaxiScan 2300, User Manual

Page: 13 / 40

Adjustments: Do not attempt any adjustments to or alteration of this product.
Do not remove the scanner’s protective housing. There are no user-serviceable
parts inside.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous laser light
exposure.
1.4 MAINTAINING THE SCANNER
The MaxiScan 2300 VS scanner requires little maintenance. Only occasional
cleaning of the scanner window is necessary to remove dirt and fingerprints.
Cleaning can be performed during operation with a non-abrasive glass spray
cleaner and a soft lint-free cloth.
1.5 CONTROLLING THE SCANNER FROM THE POS SYSTEM
The MaxiScan 2300 VS can be controlled from the POS system via the RS232C
interface. Controlling is achieved by transmitting the following single byte
commands to the scanner. In the Scantech default setting the following
commands are available (more details upon request):
When the scanner is disabled, the motor of the scanner will stay on until the
scanner goes into sleep mode.
The MaxiScan 2300 VS 9
ASCII code
0E Hex
0F Hex
05 Hex
function
enable (cancels disable)
disable
power-up re-initialization
byte is also called:
Shift Out or <Ctrl-N>
Shift In or <Ctrl-O>
ENQ or <Ctrl-E>
12 Hex
sleep
DC2 or <Ctrl-R>
14 Hex
wake (cancels sleep)
DC4 or <Ctrl-T>
Pollux manual deel_1 03-11-2000 10:27 Pagina 9