Intermec JD2010, Quick Reference Manual

Page: 20 / 22

JANUS 2010 Communications Dock Quick Reference Guide
20
Pin Assignments for the Dock Connectors
The two ports on the communications dock use 25-pin D-style connectors. The
following pinouts are used for the Network and Auxiliary connectors. The
network connector is a DTE interface and the auxiliary connector is a DCE
interface.
Network Connector
(1) Protective ground
(2) Transmitted data (out)
(3) Received data (in)
(4) Request to send (out)
(5) Clear to send (in)
(6) Data set ready (in)
(7) Signal ground
(8) Received line signal detector (in)
(11) Reserved
(13) Input Circuit B (in)
(14) Output Circuit A (out)
(15) Transmitter clock (in)
(16) Input Circuit A (in)
(17) Receiver clock (in)
(19) Output Circuit B (out)
(20) Data terminal ready (out)
(22) Ring indicator (in)
2010Q.007
Auxiliary Connector
(1) Protective ground
(2) Transmitted data (in)
(3) Received data (out)
(4) Request to send (in)
(5) Clear to send (out)
(6) Data set ready (out)
(7) Signal ground
(8) Received line signal detector (out)
(11) Reserved
(13) Input Circuit B (out)
(14) Input Circuit A (in)
(15) Transmitter clock (out)
(16) Output Circuit A (out)
(17) Receiver clock (out)
(19) Input Circuit B (in)
(20) Data terminal ready (in)
(22) Ring indicator (out)
2010Q.008