manualshive.com logo in svg

Intermec EasyCoder PD4, Programmer'S Reference Manual

Share
Download
Intermec EasyCoder PD4 Programmer'S Reference Manual Download Page 13

ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual  

Chapter 1—General Information

Field Positioning

The printable area of the label forms a grid, where the X-axis runs across 

the media and the Y-axis runs along the media path. Dots are used as the 

unit for establishing position of the upper left corner of each field in rela-

tion to a specified reference point.
The printer is available with two different printhead densities (the 203.2 

dpi printer and the 300 dpi printer have different firmware versions):

Density

Medium

High

X-axis 

203.2 dpi (8 dots/mm)

300 dpi (11.81 dots/mm)

Y-axis 

203.2 dpi (8 dots/mm)

304.8 dpi (12 dots/mm)

Number of active dots: 

832

1208

Max. print width: 

104 mm

102.2 mm

Dot line to tear bar:

136 dots

204 dots

Dot line to cutter blade:

256 dots

384 dots

Text and bar code fields can be rotated around their insertion points, 

whereas lines, boxes and graphics cannot be rotated.  However, the entire 

print image can be rotated 180°. The illustration below shows coordinates 

for the default print direction (

ZT

). 

Summary of Contents for EasyCoder PD4



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands