Intermec 700 Series User Manual Download Page 57

Page: 57 / 62

700 Series Mobile Computer User’s Guide

Glossary-1

Glossary

Applet

Small applications, typically bundled with the operating

system.

Boot Default Drive

The drive from which the computer will boot.

Button

An object that can be clicked, selected, or unselected in your

windows. Usually an event tree is attached to a button so

that when it is clicked, an action is performed.

CompactFlash (CF) Card

A small size (half the size of a normal PC card) which has

been specially designed to meet the needs of small

hand-held computers.

CPU

Central Processing Unit.

Default Drive

See Boot Default Drive.

Dock

A device in which one or more hand-held computers may be

placed for charging and communication.

Download

The transmission of data from a host computer to a mobile

computer.

Ethernet

A 10-Mbps, coaxial standard for LANs. Also slang for the

coaxial cable that carries the standard.

Summary of Contents for 700 Series































































Search results

Summary of Contents for 700 Series

Reviews:

Related manuals for 700 Series

Brands by name

Popular brands

Intermec 700 Series, User Manual

Search results

Summary of Contents for 700 Series

Reviews:

Related manuals for 700 Series

Brands by name

Popular brands