SECTION 1
General Information
1-18
700 Series Mobile Computer User’s Guide
On Your 700 Series Mobile
Computer
1. On your mobile computer save any data to the
stor-
age card
directory.
2. Suspend your mobile computer.
3. Remove the two screws on the top of the mobile com-
puter and lift up the access door.
4. Remove the CompactFlash card from your mobile com-
puter. For the rest of these instructions we will refer
to this card as the Pocket PC Boot card.
5. Insert the flash update card into your mobile comput-
er.
6. Cold reset your mobile computer by opening the bat-
tery compartment and pressing the reset button firmly
with a blunt object.
7. Reinsert the battery.
8. Place your mobile computer on a charging source.
9. Press any key to begin the bootloading flash process.
10. When your mobile computer is put on charge you see a
“Programming Flash” message at the bottom of the
screen. You will then see a progress bar moving across
the screen. When the flash update process is done you
see a “Reset System” message.
11. Remove the flash update card from your mobile com-
puter.
12. Insert a card containing a image compatible with the
flash. Image must be one compatible with the flash.
13. Cold reset your mobile computer by opening the bat-
tery pack compartment door and pressing the reset
button firmly with a blunt object.
14. Reinsert the battery.
15. Replace the CompactFlash access door and two
screws.