SECTION 2
Single and Multidock Installation
2-6
6100 Series Dock Installation Instructions
Multidock Mounting Bracket
Installation
On framed walls, it is preferable to drive lag screws directly
into studs whenever possible. If this is not possible, it may
be necessary to install scab studs or plywood (5/8 inch
thickness or greater) reinforcement.
1. Position one mounting bracket at a suitable height
and use 1/4 inch or larger hardware (lagscrew or con-
crete fastener) to secure one mounting bracket to the
wall.
2. Use three fasteners in each bracket.
3. Install the second bracket level with the first, and 24
to 34 inches from it.
"
NOTE:
When installing several multidocks across a wall, be sure to allow
clearance between them for the power cables.
Figure 2-4
Mounting Brackets For Multidock
24 -- 37”
