background image

Setting Astro On/Off Events 

Access the Astro Events screen to configure Astronomic ON/OFF events for days of the week and circuits. The time switch enables one 
Astronomic ON (at sunset) and one Astronomic OFF (at sunup) per day of the week for each load. Follow this procedure to set Astro ON/

OFF Events.

1.  Press MODE to scroll to SET ASTRO ON/OFF EVENTS. The screen displays SUNSET (or SUNUP), the days of the week, and 

the first load indicator. 

NOTE: If you are creating an Astro event as directed in Setting Astronomic and Fixed Events, press ENTER/NEXT to adjust be-

tween SUNSET or SUNUP.

2.  Press DAY to select the days (MON-SUN, MON-FRI, SAT-SUN), or a user-configured group of days) you want the Astro event to 

occur.

3.  The screen displays the configured days under SUNSET or SUNUP. Press DAY to add or remove a group of days. To select  

individual days, press DAY and scroll through options until ON and MON flash on the screen.

4.  Take one of these actions. 

If you select...

Then...

MON-SUN, MON-FRI, SAT-SUN,

Press ENTER/NEXT to save.  

Go to step 6.

NOTE: If you are performing the procedure Setting Astronomic and 

Fixed Events, return to step 2 of the procedure.

Individual days, (ON and MON),

Press + or -  to select Astro event ON or -- (OFF) for the flashing day 

of the week and press DAY.  Go to step 5. 

5.  Repeat the process for each day of the week. When all the individual days are configured, press ENTER/NEXT to save. 

NOTE: If you are performing the procedure Setting Astronomic and Fixed Events, return to step 2 of the procedure.

6.  Repeat steps 3 through 5 to configure SUNUP OFF. When both SUNSET and SUNUP are set, go to step 7.
7.  Take one of these actions: 

If...

Then...

You want to configure an Astro event for another 

load,

Press ENTER/NEXT. Repeat steps 3 through 6.

All the required Astro events are set,

Press MODE to exit. The procedure is complete.

Users can configure Astro events, fixed timed events, or a combination of Astro and fixed timed events.  

Perform the applicable instructions below. 

 - To set Astro events only, perform the procedure Setting Astro On/Off Events
 - To set fixed timed events only, perform the procedure Setting Fixed Timed Events
 - To set a combination of Astro and fixed events, perform the procedure Setting Astronomic and Fixed Events

Setting Astro and Fixed Events  

5.  Repeat steps 2 through 4 as needed to configure times for additional loads. 
6.  When all the loads are set, press MODE to save settings. The time switch displays SET SUNSET at the top of screen and LOAD 1.
7.  Repeat steps 2 through 5 as necessary to set sunset times.
8.  When all the sunup and sunset times are configured, press MODE to save. 

Setting Fixed Timed Events

Access the Fixed ON/OFF screen to set fixed switching times. Odd-numbered events are for ON switching and even-numbered events 

are for OFF switching. Follow these steps to set fixed time events. 

1.  Press MODE to scroll until SET FIXED ON@ appears on the screen. 
2.  Press DAY. The screen displays 12:00 am, the days of the week, and the event number. 

NOTE: If you are performing the procedure Setting Astronomic and Fixed Events, press ENTER/NEXT to adjust between Fixed 

ON@  and Fixed OFF@ and then press DAY.

3.  Press + or -  to set the starting time for the fixed event. 
4.  Press DAY to select the days (MON-SUN, MON-FRI, SAT-SUN), or a desired group of days) you want the fixed event to occur.

NOTE: To select the individual days, press DAY to scroll through the options until ON and MON flash on the screen.

5.  Take one of these actions.

 

If you select...

Then...

MON-SUN, MON-FRI, SAT-SUN,

Press ENTER/NEXT to save. Go to step 8.  

NOTE: If you are performing the procedure Setting Astronomic and Fixed Events, 

return to step 4 of that procedure. 

Individual days

Press + or -  to select event ON or event -- (OFF) for Monday and press DAY.  Go 

to step 6. 

6.  Repeat the process for each day of the week. When all the individual days are configured, press the applicable ON/OFF buttons 

for the applicable loads that you want to include with the fixed timed event. 

Summary of Contents for ET8215B









Reviews: