Chapter 2: Installation
UVP 1.3 MPX HD 18X PTZ Camera User Manual
5
Figure 2: Overview of the dome camera
1. Ethernet RJ-45 connector.
Connect to the network devices.
2. Video output.
Connect the BNC connector to a CCTV
monitor. Optional.
3. Power supply cord.
C24 VAC power supply.
4. Housing.
5. PTZ module.
6. Bubble.
Specifications
Operating temperature
Pendant housing: -10 to +50 °C (-14 to +122 °F)
Flush housing: -30 to +65 °C (-22 to +149 °F)
Power supply
24 VAC +/- 4 VAC
Power consumption
30 W (heater on), 15 W (heater off)
Dimensions (mm)
Pendant housing: Ø 220 × 261 mm (Ø 8.66 ×10.27 in.)
Flush housing: Ø 206 × 241 mm (Ø 8.11 × 9.49 in.)
Environmental
Pendant housing: IP66
Flush housing: IP54
Weight
5 kg (11 lb.)
System requirements
For proper operation, adhere to the following operational, cable, and power
requirements for the dome camera.
Cable requirements
Table 1 on page 6 lists the requirements for the cables that connect to the dome
camera.
Summary of Contents for UVP-M1120F-18X-N
