background image

Copyright 

© 2014 United Technologies Corporation 

Interlogix is part of UTC Building & Industrial Systems, a unit of 

United Technologies Corporation.  All rights reserved.  

Trademarks and patents 

T

rade names used in this document may be trademarks or 

registered trademarks of the manufacturers or vendors of the 

respective products.. 

Manufacturer 

United Technologies Corporation 

2955 Red Hill Avenue, Costa Mesa, CA 92626

-

5923, USA

 

Authorized EU manufacturing representative:

 

UTC Fire & Security B.V.

 

Kelvinstraat 7, 6003 DH Weert, The Netherlands

 

Certification 

 

 

N4131

 

FCC compliance 

Class A: 

This equipment has been tested and found to comply 

with the limits for a Class A digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residen

tial 

area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own 
expense.

 

ACMA compliance 

Notice! 

This is a Class A product. In a domestic environment 

this product may cause radio interference

 in which case the 

user may be required to take adequate measures. 

 

Canada 

This Class A digital apparatus complies with Canadian ICES

-

003.  

Cet appareil numérique de la classe A est conforme à la norme 

NMB-0330 du Canada.  

European Union directive 

2004/108/EC (EMC directive): 

Hereby, UTC Fire & Security 

declares that this device is in compliance with the essential 
requirements and other relevant provisions of Directive 

2004/108/EC. 

 

2002/96/EC (WEEE directive)

Products marked with this 

symbol cannot be disposed of as unsorted municipal waste in 
the European Union. For proper recycling, return this product to 
your local supplier upon the purchase of equivalent new 
equipment, or dispose of it at designated collection points. For 
more information see:

 

www.recyclethis.info

 

2006/66/EC (battery directive): 

This product contains a battery 

that cannot be disposed of as unsorted municipal waste in the 
European Union. See the product documentation for specific 
battery information. The battery is marked with this symbol, 
which may include lettering to indicate cadmium (Cd), lead (Pb), 
or mercury (Hg). For proper recycling, return the battery to your 
supplier or to a designated collection point. For more 
information see: www.recyclethis.info.

 

Contact information 

For contact information see: www.interlogix.com or 
www.utcfssecurityproducts.eu.

 

 

Summary of Contents for TVM-2700





















Reviews: