Interlogix TVM-1701, User Manual

Page: 5 / 20

User Manual 3
Assembling the monitor
The monitors are designed for use on a
desktop.
The arm of the monitor stand is shipped pre-
installed on the monitor.
To assemble the monitor:
1. Put a smooth pad or cloth on a level
surface . P lace the monitor on it fac ing
downwards.
2. Insert the arm of the monitor stand of the
monitor into the pedestal foot provided.
See figures below.
TVM-1701/TVM-1 901 models
TVM-1850/TVM-2150 models
To disassemble the monitor:
1. Put a smooth pad or cloth on a level
surface. Place the monitor on it facing
downwards.
2. Using a screwdriver or a similar object
with a sharp end, carefully detach the
supporting arm from the foot by pressing
the groove on the back of the supporting
arm . (Note that the fixation point can be
broken if too much force is applied ) . See
figures below.
TVM-1701/TVM1901 models
TVM-1850/TVM-2150 models
Connections
1. DC 12V Input
2. VIDEO OUT
Composite signal output
3. VIDEO IN
Composite signal input.
4. AUDIO L
Audio signal input left.
5. AUDIO R
Audio signal input right.
6 . PC Stereo Input
7. Head Phone Out
8. USB
Service port
9. HDMI
HDMI signal input.
10. VGA
RGB signal input.