Interlogix TVM-1701, User Manual

Page: 3 / 20

User Manual 1
Content
Important safeguards 1
Introduction 2
Features 2
Assembling the monitor 3
Connections 3
Front panel controls 4
Control panel (TVM- 1701 model) 4
Control panel (TVM-1901/ TVM-1850/
TVM- 2150 models) 4
Changing a monitor parameter 5
Hot keys 5
Adjustment procedure 5
OSD function 5
VGA menu 6
Cam menu (HDMI) 8
Self-diagnosis 10
Removing the monitor stand 10
Attaching the monitor stand 11
Troubleshooting 11
Specifications 13
TVM-1701/TVM- 1901 models 13
TVM-1850/TVM- 2150 models 14
Factory preset timings 16
Important safeguards
1. Installation cautions :
• Do not block any ventilation
openings.
• Always ensure that the monitor is
located in a well-ventilated area to
prevent the unit from overheating.
• Only use accessories specified by
the manufacturer or those sold with
the product.
• Avoid operating or placing the
monitor in the following
environments: extremes of
temperatures, both hot and cold;
high humidity; direct sunlight;
excessively dusty surroundings;
avoid close proximity to other
equipment that generates a strong
magnetic field
2. Water and moisture : Do not use this
appliance near water. To reduce the risk
of fire or electric shock, do not expose
this unit to rain or moisture.
3. Power cord and power cord
protection
: Power cords should be
routed so that they not likely to be
walked on or pinched. Pay particular
attention to the location of cords and
plugs, convenience receptacles, and the
point of exit from the appliance.
4. Product care : Do not touch the screen
directly with fingers. The oils from your
skin may leave marks on the surface of
the screen, which are difficult to be
removed and may damage the screen
permanently. Do not apply pressure to
the screen.
5. Cleaning : Clean only with a dry cloth.
6 . Servicing : Do not attempt to service this
unit yourself. Opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Lightning : For added protection during a
lighting s torm or when this unit is left