TVE-400/800-1600 H.264 IP Video Encoder User Manual
15
Save playback file to
: Set the saving path for the clipped video files in
playback mode.
3. Click
Save
to save the settings.
Time settings
You can set up the date and time that will appear on-screen and time stamped
recordings. The start and end time of daylight savings time (DST) in the year can
also be set.
A Network Time Protocol (NTP) server can also be set up on your encoder to
keep the date and time current and accurate. If the encoder is connected to a
Dynamic Host Configuration Protocol (DHCP) network that has time server
properties configured, the cameras will synchronize automatically with the time
server.
To configure time settings:
1. Click
Device Configuration
>
Device Parameters
>
Time Settings.
The
Time Settings window appears.
2. Select the time zone.
Select the time zone that is closest to the device’s location from the drop-
down list.
3. Configure the time synchronization method: NTP server or manually.
Configuring time sync by NTP server
: Check the
NTP
box. Enter the IP
address and port of the NTP server.
Note
: If the encoder is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44) or europe.ntp.pool.org. If
the encoder is set up in a more customized network, NTP software can be
used to establish a NTP server used for time synchronization.
Summary of Contents for TVE-1200
Page 1: ...TVE 400 800 1600 H 264 IP Video Encoder User Manual P N 1072585C EN REV 1 0 ISS 16OCT12...
Page 4: ...ii TVE 400 800 1600 H 264 IP Video Encoder User Manual Specifications 43...
Page 13: ...TVE 400 800 1600 H 264 IP Video Encoder User Manual 9 Menu tree Figure 5 Encoder menu tree...
Page 50: ...46 TVE 400 800 1600 H 264 IP Video Encoder User Manual...
