background image

 

TruVision HD-TVI 1080P Camera Configuration Manual 

Configuration 

This section describes how to set up the menu settings. 

Video Out 

Select PAL or NTSC. 

Languages  

Select one of the languages available: 

English, Japanese, CHN1, CHN2, Korean, German, French, Italian, Spanish, 
Polish, Russian, Portuguese, Dutch, Turkish, Hebrew or Arabic. 

Note: 

The TVB-2406/4406 camera only supports English and Chinese. 

Setup 

Smart Focus 

Enable 

Smart Focus

Use this feature to remotely sharpen the focus of a 

lens. When the feature is enabled and you change the focus of a lens, the 
focus

 

number on-screen changes and the focus automatically adjusts to the 

highest value to obtain the best focus quality. 

Note:  

TVB-2403/4403, TVB-2406/4406 and TVD-2403/4403 cameras do not 

support this feature. 

Scene 

Select INDOOR, OUTDOOR, INDOOR1 or LOW-LIGHT depending on the 
installed environment. 

Note

:  The TVB-2406/4406 camera only support INDOOR and OUTDOOR. 

Lens 

Select as lens mode MANUAL or MANUAL/DC depending on the 
characteristics of the camera lens. 

For cameras with a varifocal lens, this option is unavailable.   

For box cameras, select the lens setting according to the lens type used, 
Manual or DC. 

For cameras with a motorized lens, use the following settings:  
TVB-2406/4406 and TVB-2406/4406: 5 to 50 mm. Other motorized lenses are 
not supported. 

Select the following options under the Lens menu: 

 

Summary of Contents for TruVision TVB-2403





















Reviews: