Interlogix NXG-1820-EUR Installation And Programming Manual Download Page 73

Page: 73 / 176

xGenConnect Installation and Programming Guide

This is achieved using the Scenes feature.

Note:

Ensure you can view the Live Stream from the camera before continuing.

1. Log in to the Ul app.

2. Touch Menu

then Settings.

3. Select Scenes under the Settings Selector.

4. Select the Scene to Configure and type a Scene Name.

5. Leave the

“Enable App Button” ticked to show a shortcut button on the home

screen of the Ul app. Untick this option to hide it.

6. Select the Activate Schedule - Always On to allow recording at all times.

7. Select the event that will trigger recording a video clip using the Activate

Event Type drop-down box.

8. Select the Activate Zone/Area/User/Action if applicable.

9. Select Action Device (1) Alarm System, Action Type

“Trigger Camera Video

Clip

”, then the cameras you wish to record a video clip when the event is

triggered.

10. Click Save, Back.

11. Activate the event and wait for the programmed recording time (typically 15

seconds). Camera will record to the camera’s microSD card.

12. Click the camera icon and check the video clip plays back.

Summary of Contents for NXG-1820-EUR

















































































































































































Search results

Summary of Contents for NXG-1820-EUR

Reviews:

Interlogix NXG-1820-EUR, Installation And Programming Manual, Page: 73 / 176

Search results

Summary of Contents for NXG-1820-EUR

Reviews: