Interlogix NXG-1820-EUR Installation And Programming Manual Download Page 105

Page: 105 / 176

xGenConnect Installation and Programming Guide

xGenConnect Works with Google Assistant

xGenConnect Works with Google Assistant (WWGA) is the new programme for
home automation from Google.

You will need a Google Account to use Google Nest

’s suite of connected home

devices and services which includes Google Home Mini, the Home app, and
UltraSync connected home services.

Google Assistant provides key benefits such as:

• A single place to manage all your connected home devices from Google,

Nest, and UltraSync.

• Whole-home control via automated routines, voice control, display and touch

surfaces, and the Home app.

To connect xGenConnect to your Google Account:

1. You will need a device with Google Account and Google Home installed.

2. Open the Ul Mobile app. Log in to the site as the Master User and

tap the top left menu icon. Select Google Assistant to start the setup.

Summary of Contents for NXG-1820-EUR

















































































































































































Search results

Summary of Contents for NXG-1820-EUR

Reviews:

Interlogix NXG-1820-EUR, Installation And Programming Manual, Page: 105 / 176

Search results

Summary of Contents for NXG-1820-EUR

Reviews: