Interlogix NXG-1820-EUR Installation And Programming Manual Download Page 134

Page: 134 / 176

122

xGenConnect Installation and Programming Guide

• xGenConnect automatically handles schedules that span midnight (e.g.

bakers hours), do not tick the following day of the AM hours. (See

xGen

Reference Guide

for more details.)

Programming Sequence

14. Holidays

7. Schedules

18. Channel Groups

→

14. Holidays

Instructions

1. Go to Menu 7. Schedules.

2. Enter a name for the Schedule.

3. Select the first Start and End time.

4. Select the days you want this start and end time to apply to.

5. If you are using the DLX900 software you will be able to see 4 sets of times

and days, click the drop-down in the middle to access more. Each schedule
can have up to 16 sets of times and days.

If you are using a NXG-18xx, press the Up and Down buttons to access the
16 sets of times and days.

Summary of Contents for NXG-1820-EUR

















































































































































































Search results

Summary of Contents for NXG-1820-EUR

Reviews:

Interlogix NXG-1820-EUR, Installation And Programming Manual, Page: 134 / 176

Search results

Summary of Contents for NXG-1820-EUR

Reviews: