Interlogix NX-595E User Manual Download Page 46 | Manualshive

Page: 46 / 57

Interlogix NX-595E User Manual Download Page 46

46

NX-595E User Manual

Main Menu – Standard User Code

Status and Partition Control

This menu allows for easy operation of the NetworX security system, from arming
and disarming individual partitions to reviewing the systems 185 event log.

Up to 8 active partitions can be displayed, and control can be individual or as a
group. Active partitions will be populated on the buttons on the right, with the
screen shot above showing only one active partition, with all zones secure and
disarmed.

To arm (turn on) an individual partition(s), click on the partition number(s) in the
On Away Mode row. To fully arm all partitions, click the All button in the On Away
Mode row. The corresponding partition number(s) will illuminate red indicating a
successful arm of that partition.

To stay arm (partially turn on) an individual partition(s), click on the partition
number in the On Stay Mode row. To stay arm all partitions, click the All button in
the On Stay Mode row. The corresponding partition number(s) will illuminate
yellow indicating a successful stay arm of that partition.

To disarm partition(s) from either the stay or away arming modes, click on the
partition number to be disarmed in the Off row. To disarm all partitions, click the

Partition 1

Partition 1

«
...
44
45
46
47
48
...
»

Summary of Contents for NX-595E


























































Reviews:

No comments