![background image](http://html.mh-extra.com/html/interlogix/nx-595e/nx-595e_user-manual_2076777037.webp)
NX-595E User Manual
37
0.6 Voice message recording
0.6.1 To record an exit message
0.6.2 To record an entry message
0.6.3 To record a user name
0.6.4 To record or configure a zone name
0.6.5 To record or configure an partition name
0.6.6 To record or configure an output name
0.6.7 To record or configure a room name
0.6.8 To record a system name
Voice message recording
This is the recording centre for user names, zone names, partition names, output
names, room names and system names. The voice message-recording menu
also offers an alternant location for the recording of entry and exit messages
(previously described under menu 5 – Message bank).
Once recorded, a system name will be announced every time a new dial in
session is established with the NX-595E. This is ideal when monitoring multiple
sites.
Apart from voice recordings, zones, partitions, outputs and rooms can be
configured using pre-recorded words from the word library. You may string up to
eight words together to achieve your desired description.
Note:
Please note that voice recording is limited to the first 64 zones, pre-
recorded library words must be used for all additional zones above zone 64.
Exit Message Recording
How to: Record an Exit message
Step Example
To record a new exit message, from the Voice message recording menu
1.
[PIN]
Call the NX-595E via an offsite touch-tone phone to begin the session.
2.
Press [0] for system configuration menu.
Press [6] for voice message recording.
Press [1] to record an exit message.
3.
Press #, to record a new exit message.
4.
Record 10 second exit message after the beep.
5.
1
st
star, moves back to voice message recording menu.
2
nd
star, moves back to system configuration menu.
3
rd
star, moves back to main menu.
# Disconnects session.