![background image](http://html1.mh-extra.com/html/interlogix/nx-181-series/nx-181-series_user-manual_2077006012.webp)
12
NX-181xx NetworX Voice keypad with touch buttons User Manual
Multi Partition Arming
– “Away Mode”- Single Partitions
Independent partition control adds an enormous amount of flexibility to your
security system and your NX-181xx makes it simple to control. You may wish to
arm one partition in the away mode and disarm another partition, whilst arming a
third in the stay mode. Just follow the voice prompts and make your selection.
Step How to:
Arm partition 1 and partition 2 only, in a multi partition system in the
“Away Mode”.
1.
Close all protected doors and windows, ensure everyone has left the partitions you wish to
arm.
Ensure the partition lights of the partitions you wish to arm are lit solid green,
indicating all zones in those partitions are secure, or flashing green indicating all
zones are secure apart from forced armed zones.
2.
[?]-[?]-
[?]-[?]
Enter your 4 or 6 digit user pin code.
3.
[1]
Selects partition 1.
4.
Arms partition 1 in the away mode.
5.
[2]
Selects partition 2.
6.
Arms partition 2 in the away mode.
7.
[MENU]
Touch menu to exit (optional.)
8.
Vacate the partitions being armed immediately.
Multi Partition Disarming
– “All Partitions”
Make your way to the NX-181xx through one of the designated entry / exit doors.
When you are detected entering, your NX-181xx will repeat a warning message
for the duration of the entry delay until a valid pin code is entered. Your sirens
and communicator will activate at the end of the entry delay time if a valid pin
code is not entered. Away and Stay modes can be configured with different entry
delay times, ask your service provider for further details.
Note:
Only the partition where the delay entry time is running will be disarmed,
all other armed partitions will remain armed.
Step How to:
Disarm all partitions in a multi partition system
1.
Enter the premises through your designated entry door. If your security system has been
designed to detect your presence when making your way to the NX-181xx, a warning
message reminding you to turn off your security system will now commence. If your
presence is not detected, no warning message is announced, simply enter your 4 or 6 digit
user pin code at your NX-181xx. The following example is for systems that are designed to
detect your presence on entry.
2.
[?]-[?]-[?]-[?]
Enter your 4 or 6 digit user pin code