NX-181xx NetworX Voice keypad with touch buttons User Manual
15
How to: Bypass a single zone
Step Example:
How to bypass zone 5
1.
[MENU] - [1] Selects main menu - Option 1, To control zone bypass
2.
[5] - [ENTER] Selects zone 5.
Note: If your zone number is higher than single digit, enter the 1, 2 or 3
digits indicating the zone you wish to select followed by enter at step 2. For
example, touch [1]-[2]-[8] [ENTER] for zone 128.
3.
[0]
Toggles zone 5 from un-bypassed to bypassed state (or if already
bypassed, from bypassed to un-bypassed.)
4.
[MENU]
Exits back to main menu (“Touch [1] to control zone
bypass…etc……etc……".)
5.
[MENU]
Touch menu to exit.
Note:
Touch status to check bypassed zones, or simply arm your security
system and all bypassed zones will be announced automatically.
Control The Zone Chime
– Menu 2
You can setup your NX-181xx
so that it will “beep” when programmed zones are
tripped or activated, this is called chime. Chime mode does not trigger any
alarms, and is only used as a low level alert such as a customer entry door. You
can add and delete zones from the “chime group” offering a very flexible chime
mode feat
ure. The zones you have selected to be in the “chime group” stay in
memory and are not cleared when the security system is armed and disarmed.
How to: Control chime mode
Step Example:
Turning On / Off Chime Mode
1.
[MENU] - [2]
Selects main menu - Option 2, Chime Mode.
2.
[0]
Toggles chime mode On / Off
3.
[MENU]
Exits back to main menu (“Touch [1] to control zone
bypass…etc……etc……)
4.
[MENU]
Touch menu to exit
How to: Add a zone to the chime group
Step Example:
Adding zone 4 chime group
1.
[MENU] - [2]
Selects main menu - Option 2, Chime Mode.
2.
[4] - [ENTER]
Selects zone 4.
Note:
If your zone number is higher than single digit, enter the 1, 2 or 3
digits indicating the zone you wish to select followed by enter at step 2.
For example, touch [1]-[2]-[8] [ENTER] for zone 128.
