Interlogix NS4750-24S-4T-4X, User Manual

Page: 373 / 429

373
The page includes the following fields:
General Settings:
Object Description

Enable Loop
Protection
Controls whether loop protections is enabled (as a whole).

Transmission Time
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.

Shutdown Time
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration:
Object Description

Port
The switch port number of the port.

Enable
Controls whether loop protection is enabled on this switch port.

Action
Configures the action performed when a loop is detected on a port. Valid values
are
Shutdown Port
,
Shutdown Port and Log
or
Log Only
.

Tx Mode
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Status
This page displays the loop protection port status the ports from the Managed Switch.