Interlogix NS4750-24S-4T-4X, User Manual

Page: 108 / 429

108

Distance(m)
Display the support distance of current SFP module. The distance value is gotten
from the SFP module.

Temperature (C)
Display the temperature of current SFP module. The temperature value is gotten
from the SFP module.

Voltage (V)
Display the voltage of current SFP module. The voltage value is gotten from the
SFP module.

Current (mA)
Display the ampere of current SFP module. The ampere value is gotten from the
SFP module.

TX Power (dBm)
Display the TX power of current SFP module. The TX power value is gotten from
the SFP module.

RX Power (dBm)
Display the RX power of current SFP module. The RX power value is gotten from
the SFP module.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
4.4.5 Port Mirror
Configure port mirroring on this page. This function provides to monitor network traffic that forwards a copy of each incoming or
outgoing packet from one port of a network switch to another port where the packet can be studied. It enables the manager to
keep close track of switch performance and alter it if necessary.

To debug network problems, selected traffic can be copied, or mirrored, to a mirror port where a frame analyzer can be
attached to analyze the frame flow.

The Managed Switch can unobtrusively mirror traffic from any port to a monitor port. You can then attach a protocol analyzer
or RMON probe to this port to perform traffic analysis and verify connection integrity.