Chapter 4: Commands for CLI configuration
256
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
======================================
Loop Protection : Enable
Transmission Time : 2 sec
Shutdown Time : 2 sec
GigabitEthernet 1/1
------------------------------
Loop protect mode is enabled.
Actions are both of shutdown and log.
Transmit mode is enabled.
No loop.
The number of loops is 12390.
Time of last loop is at 1970-01-01T14:58:28+00:00
Status is down.
show mac address-table
Command:
show mac address-table [ conf | static | aging-time |
{ { learning | count } [ interface ( <port_type>
[ <port_type_list> ] ) ] } | { address <mac_addr> [ vlan
<vlan_id> ] } | vlan <vlan_id_1> | interface ( <port_type>
[ <port_type_list> ] ) ]
show
Show running system information
mac
MAC Address Table information
address-table
MAC Address Table
address
MAC address lookup
aging-time
Aging time
conf
User added static MAC addresses
count
Total number of MAC addresses
interface
Select an interface to configure
learning
Learn/disable/secure state
static
All static MAC addresses
vlan
Addresses in this VLAN
Default:
N/A
Usage Guide:
To display the
MAC address table
.
Example:
To display the
MAC address table
for
VLAN 1
.
Switch #
show mac address-table vlan 1
Type VID MAC Address Ports
Static 1 33:33:00:00:00:01 GigabitEthernet 1/1-25
10GigabitEthernet 1/1-4 CPU
Static 1 33:33:00:00:00:02 GigabitEthernet 1/1-25
10GigabitEthernet 1/1-4 CPU
Static 1 33:33:ff:00:99:00 GigabitEthernet 1/1-25
10GigabitEthernet 1/1-4 CPU
